PKTerm '99 Release 1.4d ----------------------- Introduction ------------ PKTerm '99 is a 32-bit TimeWave Host mode based Terminal program. Host mode allows the TNC to communicate with computer software that is more sophisticated than standard terminal programs. PKTerm '99 takes advantage of true multi-tasking in Windows 95, Windows 98, and Windows NT and uses standard Windows commands for ease of use. It allows for multiple streams on multiple ports including VHF Packet and HF Non-packet Modes . HF modes include Morse, Baudot, ASCII, AMTOR, PACTOR, NAVTEXt, FEC, and Listen AMTOR. Initial Configuration --------------------- After installation is complete, double click on the PKTerm '99 icon to begin the program. You will be prompted to enter your Call Sign and the Serial Number and Activation Key you received. You are able to register up to 10 different Call Signs. You will also need to select the registration set. The registration set is used if more than one Call Sign is used. To select which registration set to use, click on the left and right arrow keys. You will need to enter your Call Sign, Serial Number and an Activation Key to access the full capabilities of PK-Term '99. NOTE: Activation key is case sensitive. If you don't have a Serial Number or Activation Key you will still be able to run the program, but only in Demo mode. Demo mode allows you to operate packet only using single port, multi-stream without any of the advanced features of the program. Click on the Demo mode button to continue. You will be prompted to enter your computer's COM port and baud rate for the TNC. This allows you set which COM port your TNC is using, and the baud rate. PKTerm '99 supports COM1 through COM35. Make sure your TNC is connected to the COM port that you choose and the baud rate for your TNC is set correctly. If you find any bugs, please send them to bugs@cssincorp.com. HotKey List ----------- Here is of all the common Hotkeys that are available to make PKTerm '99 easier to use. Command Hotkey ------- ------ Open File Ctrl+O Save file Ctrl+S Print Ctrl+P Cut Ctrl+X Copy Ctrl+C Paste Ctrl+V Clear Screen Ctrl+W Repeat last text Ctrl+R Call Exchange Ctrl+F1 User assigned macros Ctrl+0-9 New VHF Session Ctrl+N New HF Session Ctrl+H Switch to ISS F2 Switch to IRS F3 Connect F7 Disconnect Shift+Alt+F7 Send Control Y Shift+Ctrl+Y Send Control Z Shift+Ctrl+Z Send Control A Shift+Ctrl+A Send Command F10 Transmit F4 Receive F5 TNC Notes --------- Some TNCs will give you extra linefeeds in VHF mode. To work around this problem use the commands ALF Disp NO and ACR Disp NO. You can put these in your startup commands. Installation Notes ------------------ The files listed below are copied into the Windows\System(Win95,98) or Winnt\System(WinNT) directory during the full install of PKTerm '99. _______________________________________________________________ Windows\System(Win95,98) or Winnt\System(WinNT) Directory File Date Time Size Version ------------- -------- ----------- ------ --------------- "12520850.cpx" 05/31/98 01:00:00 AM 2233 "" "12520437.cpx" 05/31/98 01:00:00 AM 2151 "" "ds16gt.dll" 09/15/98 01:00:00 AM 4656 "3.510.3002.23" "ds32gt.dll" 09/15/98 01:00:00 AM 5632 "3.510.3002.23" "inetwh32.dll" 09/11/96 03:33:04 PM 48640 "1.10.1.1" "mfc42.dll" 04/27/99 12:00:00 AM 995383 "6.0.8447.0" "mscpxl32.dll" 06/12/98 01:00:00 AM 13824 "3.60.3.19" "msjet35.dll" 06/01/98 01:00:00 AM 1056768 "3.51.2026.0" "msjint35.dll" 06/01/98 01:00:00 AM 139264 "3.51.623.0" "msjter35.dll" 06/01/98 01:00:00 AM 36864 "3.51.623.0" "msrd2x35.dll" 06/01/98 01:00:00 AM 262144 "3.51.623.0" "msvcirt.dll" 06/17/98 01:00:00 AM 77878 "6.0.8168.0" "msvcrt.dll" 02/11/99 02:33:58 AM 266293 "6.0.8397.0" "msvcrt20.dll" 10/13/96 08:38:00 PM 253952 "2.11.0.0" "msvcrt40.dll" 10/13/96 08:38:00 PM 65024 "4.2000.0.6172" "nknob32.ocx" 12/29/97 08:58:34 PM 33280 "1.3.0.0" "nled.ocx" 12/30/97 11:27:12 AM 47616 "1.2.0.0" "nmeter32.ocx" 01/01/98 04:36:58 PM 33280 "1.3.0.0" "odbc16gt.dll" 09/15/98 01:00:00 AM 26224 "3.510.3002.23" "odbc32.dll" 09/15/98 01:00:00 AM 195344 "3.510.3002.23" "odbc32gt.dll" 09/15/98 01:00:00 AM 6656 "3.510.3002.23" "odbcad32.exe" 09/15/98 01:00:00 AM 9216 "3.510.3002.23" "odbccp32.cpl" 09/15/98 01:00:00 AM 13312 "3.510.3002.23" "odbccp32.dll" 09/15/98 01:00:00 AM 86288 "3.510.3002.23" "odbccr32.dll" 09/15/98 01:00:00 AM 183568 "3.510.3002.23" "odbcint.dll" 09/15/98 01:00:00 AM 70144 "3.510.3002.23" "odbcji32.dll" 05/31/98 01:00:00 AM 37888 "3.51.1713.0" "odbcjt32.dll" 05/31/98 01:00:00 AM 247296 "3.51.1713.0" "odbctl32.dll" 05/31/98 01:00:00 AM 72704 "3.51.1713.0" "odbctrac.dll" 09/15/98 01:00:00 AM 141072 "3.510.3002.23" "oleaut32.dll" 10/15/98 01:04:00 PM 598288 "2.30.4265.1" "olepro32.dll" 10/15/98 01:04:00 PM 164112 "5.0.4265.1" "regsvr32.exe" 04/24/98 12:00:00 AM 37136 "5.0.1641.1" "vbajet32.dll" 06/18/98 01:00:00 AM 30992 "6.0.1.8167" "vbar332.dll" 02/17/98 01:00:00 AM 368912 "3.0.0.6908" _______________________________________________________________ If you have Windows 95 or Windows NT-SP3, this file is executed. It causes the file comctl32.dll to be copied to the Windows\System(Win95,98) or Winnt\System(WinNT) directory. "401comupd.exe" 11/11/98 02:08:10 PM 435448 "4.71.819.0"